Home Dev-board Bootloader TFTP DMX512 RDM Pixel LTC SMPTE Ethernet Memory GitHub Contact PayPal.Me Donate

Development board

GitHub download. This board can be used with the GD32F103Rx, GD32F303Rx and the GD32F107Rx, GD32F207Rx, GD32F407Rx (Ethernet) MCU's.

Please note that the crystal for the GD32F107Rx, GD32F207Rx and the GD32F407Rx is 25MHz and the crystal for the GD32F103Rx and GD32F303Rx is 8MHz.

The USB is power and DFU (Ethernet MCU only).

The 2x13 header is pin compatible with the Orange Pi Zero and Raspberry Pi boards. The 1x13 header is pin compatible with the Orange Pi Zero.

2x13 Header
3.3V PWR 1 2 5V PWR
REMAP = 1 / AF4 I2C0 SCA PB9 3 4
I2C0 SCL PB8 5 6 GND
PA6 7 8 PC10 USART2 TX REMAP [1:0] =“01” (partial remap) / AF7
GND 9 10 PC11 USART2 RX
REMAP = 0 USART5 RX PC7 11 12 PB10
USART5 TX PC6 13 14 GND
PB14 15 16 PB15
3.3V PWR 17 18 PA13 SWDIO
SPI2 MOSI PB5 19 20 GND
SPI2 MISO PB4 21 22 PA11
SPI2 SCK PB3 23 24 PA15 SPI2 CS
GND 25 26 PA14 SWCLK

1x13 Header
1 NC
2 GND
3 PA14 SWCLK
4 GND
5 PA13 SWDIO
6 NRST
7 PA5 DAC1
8 PA4 DAC0
9 PC12 UART4 TX
10 PD2 UART4 RX
11 PB6 USART0 TX REMAP = 1 / AF7
12 PB7 USART0 RX
13 GND

Boot UART0
1 GND
2 USART0 RX PA10 REMAP = 0
3 USART0 TX PA9
LED's
1 PC0
2 PC2
3 PC3
4 3V3 PWR
J5
1 PC8
2 PC9
3 PC13

GD32F103Rx GD32F303Rx (only)

2x7 Header
PB13 1 2 PB0
PB11 3 4 PB12
PC4 5 6 PC5
PA1 7 8 PA7
PA2 9 10 PC1
GND 11 12 GND
3V3 PWR 13 14 3V3 PWR

GD32F103Rx GD32F303Rx (only)

1x4 Header
GND 1 GND
3V3 PWR 2 3V3 PWR
REMAP[1:0] = 00/01 / AF4 I2C1 SCL 3 USART2 RX REMAP = 0 (no remap)
I2C1 SCA 4 USART2 TX

GD32F107Rx GD32F207Rx GD32F407Rx (only)

External-PHY
RMII TXD1 1 2 PHY INT
RMII TX_EN 3 4 RMII TXD0
RMII RXD0 5 6 RMII RXD1
RMII REF_CLK 7 8 RMII CRS_DV
MDIO 9 10 MDC
GND 11 12 GND
3V3 PWR 13 14 3V3 PWR